Genie Garage Door Opener
Repair & Installation

🔧

Opener Repair

Motor failures, stripped worm gears, logic board issues — we diagnose and fix all Genie opener problems on the spot.

🌀

Spring Replacement

A broken spring puts dangerous strain on your Genie motor. We replace torsion and extension springs same day with proper calibration.

🔗

Cable Repair

Frayed or snapped lift cables cause your door to hang crooked and stress the opener. We replace them and re-balance the system.

📡

Aladdin Connect Setup

WiFi pairing, app connectivity, and smart-home integration for Genie’s Aladdin Connect-equipped openers — configured and tested.

🏠

New Genie Install

Replacing an old noisy opener? We install the full Genie lineup — chain, belt, and screw-drive models — with complete setup included.

StealthDrive 750

3/4 HP DC belt drive · ultra-quiet · Aladdin Connect WiFi

ChainMax 1000

1 HP DC chain drive · battery backup · heavy-duty residential

SilentMax 6170H

3/4 HP belt drive · H-Drive · HomeLink · quiet performance

Chain Glide 450

1/2 HP chain drive · budget-friendly · common in older homes

ScrewGlide 3053

Screw drive · low maintenance · handles heavy doors well

PowerMax 1200

1-1/4 HP · heavy door specialist · commercial-grade capacity

🏅

Genie-Trained Techs

We know Genie’s screw-drive worm gear system, Intellicode rolling-code technology, and H-Drive belt mechanism — not just general opener repair.

📦

Parts in Stock

We carry Genie worm gears, logic boards, remotes, Intellicode keypads, and safety sensors so we can fix most openers in a single visit.

⚡

Same-Day Available

Most Genie repairs in Pueblo are done same day. Call before noon and we’ll aim to have your opener running again that afternoon.

Why does my Genie opener reverse before closing all the way?

This is almost always a safety sensor issue — the photo-eye sensors at the base of the door tracks are misaligned or have something blocking the beam. Check that both sensors show a solid light (one amber, one green). If they’re blinking or one is out, realign them or call us. It can also be a down-limit adjustment problem on older Genie screw-drive models.

My Genie remote stopped working — is it the remote or the opener?

Start with fresh batteries. If new batteries don’t fix it, try the wall button — if the wall button works but the remote doesn’t, the remote needs to be re-programmed to the opener using the learn button. If neither works, the issue is with the opener’s logic board or frequency receiver. We can diagnose it on-site and reprogram or replace what’s needed.

How do I set up Aladdin Connect on my Genie opener?

Aladdin Connect works with most Genie openers made after 2011. You’ll need the Aladdin Connect add-on kit if your opener doesn’t have built-in WiFi, or if it does, download the Aladdin Connect app and follow the pairing instructions on the learn button. If you’re having trouble getting it to connect or stay online, give us a call — we set these up regularly and can walk you through it or bandle the setup during a service visit.

Genie screw-drive vs belt-drive — which is better for Pueblo?

Both work well here. Screw-drive openers have fewer moving parts and handle temperature swings decently, but need periodic lubrication on the screw rail. Belt-drive models are significantly quieter and ideal if the garage is attached to a living space. For Pueblo’s climate — hot summers, cold winters, occasional extreme temps — either works, but belt-drive has become the more popular upgrade choice.

How long do Genie openers last?

Withregular maintenance, Genie openers typically last 12–15 years. Their screw-drive models are particularly long-lived when lubricated annually. Belt-drive models tend to have fewer wear-related failures. If your Genie opener is over 10 years old and needing repairs, we’ll give you an honest assessment of whether it’s worth fixing or honest to upgrade.